Batt Fiberglass Insulation in Orlando & Central Florida

Insulate It Solutions installs batt fiberglass insulation for homes and businesses across Orlando and Central Florida. Batt is the most commonly made and used attic insulation material in our area. It fits almost any space when installed correctly, holds up in Florida heat, and is one of the most cost effective ways to bring an older home up to the R-value it needs. Our crew works out of Apopka and serves Orange, Seminole, Lake, Osceola, Brevard, and Volusia counties. Call (352) 558-8672 or request a free quote and we will give you a set price for the job.

What You Need to Know About Batt Insulation

When people think of insulation, batt insulation is what typically comes to mind first. It comes produced in rolls of fiberglass or mineral wool (also called rock wool), sized to fit between the joists in your attic or the studs in your walls. The flexible fibers of the fiberglass can fit almost any space if installed correctly.

Fit is everything with batts. Gaps, compression, and sloppy cuts around wiring and plumbing all eat into performance. Our installers cut each piece to the cavity so the material performs at its full rated R-value instead of a fraction of it.

Batt insulation is installed with a facing (kraft-faced batts) which serves as a vapor barrier. In certain climates like the one we face here in Orlando, a separate, stronger vapor barrier is required. We look at the moisture conditions in your attic before we recommend one approach or the other.

The R-value your project needs depends strictly on the climate, local building codes, and the area you choose to insulate. An attic floor needs more than a garage wall. During your free quote we measure the space, check what is already there, and tell you what the code calls for. No guessing.

Residential Batt Insulation

Batt insulation is one of the most commonly used types of insulation in Central Florida homes because the fiberglass form makes this material easy to install and fit to almost any attic space. That matters, because the attic is where energy loss is most prevalent in your home. Heat pours in through the roof all summer, and your A/C runs longer to keep up.

A batt insulation upgrade gives you:

• Reduced energy bills. Your air conditioner cycles less when the attic stops feeding heat into the house.
• Easy installation. Batts go in clean and fast, which keeps labor time and cost down.
• Efficient savings. Material cost stays lower than foam while still meeting code R-values.

If the old material in your attic is flat, wet, or full of debris, we handle insulation removal first. We can also pair the job with attic air sealing so the new batts sit on a sealed floor and do not leak conditioned air around light fixtures and top plates.

Commercial Batt Insulation

Our team has been installing batt insulation for businesses, office buildings, and complexes around Orange, Lake, Seminole, and Osceola counties for over a decade. Property managers and general contractors call us because we show up when scheduled, quote a firm price, and finish on time.

Batt works well in commercial spaces with open stud and joist cavities, and it keeps material cost predictable on larger square footage. See our commercial insulation page for more on how we handle bigger projects.

Batt, Blown-In, or Spray Foam?

Customers ask us this on almost every quote. Here is the straight answer.

Batt fiberglass is the right call for open cavities, new construction, garage ceilings, and budget-conscious attic jobs. It is the commonly used material for a reason.

Blown-in fiberglass is better for topping up an existing attic with lots of obstructions, since the loose fill wraps around things batts cannot.

Spray foam is the premium option. Spray foam insulation in the Central Florida area can reduce your heating and cooling energy consumption by up to 50%, as well as reduce HVAC capacity requirements, maintenance, and wear on A/C equipment. Read more on our spray foam insulation page.

We install all three, so we have no reason to push you toward one. During your quote we walk the attic, show you what we see, and lay out the options with prices for each.

Why Central Florida Calls Insulate It Solutions

Quality work is our number one focus at Insulate It Solutions. We are an owner-operated company based in Apopka, and the owner is involved in your job from the first call. When you phone in, you talk to Travis, and the price he quotes is the price you pay.

Our customers say it better than we can. Tina in Orlando told us, "The final price was what was quoted, which was a nice change from what has happened in the past with other contractors." Daniel F in Orlando called after shopping several companies: we came out the same day he called, gave him a set price on scene, and offered options on different types of insulation with dates that worked for him.

That is how we run every job. Show up on time, do the work right, clean up after ourselves, and charge what we said we would charge.

Areas We Service

We install batt fiberglass insulation across six Central Florida counties.

• Seminole County: Oviedo, Winter Springs, Casselberry, Altamonte Springs, Longwood, Lake Mary, Sanford
• Orange County: Maitland, Winter Park, Apopka, Lake Nona, Winter Garden, East Orlando, Windermere
• Lake County: Clermont, Tavares, Monteverde, Eustis, Mt. Dora, Leesburg, Astatula
• Osceola County: Kissimmee, Four Corners, Reunion, Celebration, St. Cloud, Poinciana, Campbell
• Brevard County: Titusville, Cocoa Beach, Melbourne, Merritt Island, Rockledge, Cape Canaveral, Indiatlantic
• Volusia County: DeLand, Debary, New Smyrna, Port Orange, Daytona, Deltona, Edgewater

Not sure if you fall in our range? Call (352) 558-8672 and ask, or check our full service areas page.

Batt Insulation FAQ

What R-value do I need for batt insulation in Florida?

It depends on the climate zone, local building codes, and which part of the building you are insulating. Attics require a higher R-value than walls, and codes differ by county. We check the current code for your address and measure your existing insulation during the free quote, then recommend the R-value that gets you compliant and comfortable.

Do I need faced or unfaced batts in Central Florida?

Kraft-faced batts come with a built-in vapor barrier. In the Orlando climate, some attics need a separate, stronger vapor barrier instead. It depends on your roof, ventilation, and moisture levels. We will look at the space and tell you which one your home actually needs.

Do you install fiberglass batt insulation in Eustis and Lake County?

Yes. We fully service Lake County, including Eustis, Mt. Dora, Tavares, Clermont, Leesburg, Astatula, and Monteverde. Our Apopka headquarters sits minutes from the Lake County line, so quotes and installs there schedule fast.

How much does batt insulation cost?

Cost depends on the square footage, the R-value required, and whether old insulation has to be removed first. We do not quote blind over the phone. We come out, measure the space, and give you a set price on the spot. The price we quote is the price you pay.

Is batt insulation as good as spray foam?

They do different jobs. Batt is the most commonly used material and delivers solid R-value at a lower cost. Spray foam costs more but air seals and insulates in one step, and it can cut heating and cooling energy use by up to 50%. We install both and will price each option so you can decide with real numbers.

Get a Free Batt Insulation Quote

Ready to fix your attic? Call Insulate It Solutions at (352) 558-8672 or fill out our estimate form and we will schedule a free on-site quote. Our office is at 700 S Hawthorne Ave, Suite 105, Apopka, FL 32703, open Monday through Friday 9am to 6pm and Saturday 9am to 1pm. You will get a firm price, a date that works for you, and a crew that leaves the space cleaner than they found it. ``` ---